-
86" Sleeper Panels86" Sleeper Panels86″ SLEEPER SKIRTS WITH EXTENDER
For 2008+ Kenworth W900 and T800 models with 86″ sleepers with extenders. Will fit models with studio bunks. Plain (no lights).
-
589Hood Extension PanelsBLANK – PETERBILT 589 SHORT HOOD (121″ BBC) HOOD EXTENSION PANELS
For Peterbilt 589 short hood (121″ BBC) models. Blank (no lites).
-
589Hood Extension PanelsBLANK HOOD EXTENSION PANEL – PETERBILT 589 LONG HOOD
For Peterbilt 589 long hood (131″ BBC) models. Blank.
-
VolvoOther AccessoriesCENTER FAIRING TRIM – 2006+ VOLVO VN600 SERIES
For 2006+ Volvo 600 series VN models. Will not fit 2025+ VN640 or VN660 models. Plain (no lights). *Will not work on 2012+ models with generator option*
-
KenworthT680KENWORTH T680 HIGH-ROOF WITH 76″ SLEEPERS SKIRTING KIT
For 2013-2020 high-roof T680 models with 76″ sleepers with extenders. Will not fit MLU/T680 Next Gen models. Plain (no lights). Measure 2.5″ wide.
-
72" Sleeper Panels72" Sleeper PanelsKENWORTH T800 & W900 AEROCAB 72″ SLEEPER SKIRTS
For 72″ sleepers on Aerocab EPA T800 and W900 2007+ models. Plain.
-
72" Sleeper PanelsKenworthKENWORTH T800 AEROCAB 72″ SLEEPER SKIRTS
For 2011+ Kenworth T800 Aerocab models with 72″ sleepers with extenders. Plain.
-
1995-2006Cab PanelsKICK PANEL CAB PANELS – KENWORTH W900 AEROCAB
For pre-2010 (pre-EPA) Kenworth W900 models. Plain, no lites. Block heater.
-
1995-2006Cab PanelsPRE-2010 KENWORTH W900 AEROCAB CAB PANELS
For pre-EPA (2010) Aerocab models. Plain (no lights).
-
1995-20062011+REPLACEMENT STAINLESS STEEL KICK PLATE – KENWORTH W900 PRE-2010
For pre-EPA 2010 models. Without block heater hole.
-
1995-20062011+REPLACEMENT STAINLESS STEEL KICK PLATE – KENWORTH W900 PRE-2010 WITH BLOCK HEATER CUTOUT
For pre-EPA 2010 models. Without block heater hole.
-
2011+Cab PanelsW900L AEROCAB PANELS – UNDERBODY DPF
For 2011+ W900L models with underbody DPF. Will not fit DayCab models due to high-route exhaust. Plain.
-
2014-2017389/389 Long Hood (131" BBC)1.75″ WIDE CAB PANELS
For 2014-2017 Peterbilt 389 Long Hood (131″ BBC) models. For models with fuel tank mounted steps. Sold in pairs. Measures 1.75″ wide and 43.13″ long. Blank (no lites).
-
2009-2013389/389 Long Hood (131" BBC)2.5″ CAB PANELS
For 2009-2013 Peterbilt 389 models. Sold in pairs. Measure 2.5″ wide and 44.54″ long. Blank (no lites).
-
2018+3672018+ PETERBILT 367 SET-BACK AXLE EXTENDED DAYCAB CAB PANELS
For 2018+ Peterbilt 367 set-back axle extended daycab models with dual exhaust. Plain. Measures 3″ wide with wrap.
-
2018+3672018+ PETERBILT 367 SET-BACK AXLE EXTENDED DAYCAB CAB PANELS
For 2018+ Peterbilt 367 set-back axle extended daycab models with dual exhaust. Plain. Block heater cutout. Measures 3″ wide with wrap.
-
2007-20082007-20083″ WIDE CAB PANELS
For 1987+ Peterbilt 379. Also 388 and 389 models from 2007-2008. Sold in pairs. Measure 43.13″ long and 3″ wide. Blank (no lites).
-
2007-20082007-20083″ WIDE EXTENDED CAB PANELS
For 1987+ Peterbilt 379. Also 388 and 389 models from 2007-2008. Sold in pairs. Extended. Measure 54.05″ long and 3″ wide. Blank (no lites).
-
Western Star49X36″ SLEEPER PANELS – WESTERN STAR 49X
For Western Star 49X models with 36″ sleepers. Designed to be used on trucks with cab mount exhaust. Blank (no lites). Measure 3″ wide.
-
2018+367367 CAB PANELS – SET-BACK AXLE WITH DUAL EXHAUST – 2018+
For 2018+ Peterbilt 367 set-back axle models with dual exhaust. Plain. Block heater cutout. Driver side 50″ long, passenger side 52″ long. Both 3″ wide.
-
38" Sleeper Panels38" Sleeper Panels38″ SLEEPER PANELS
For 2007+ EPA T800 Aerocab and W900 Aerocab models with 38″ sleepers. Blank (no lites).
-
2018+389/389 Long Hood (131" BBC)3D SKIRTING – 2018+ 389 LONG HOOD
For 2018+ Peterbilt 389 models. 3D one piece cab and hood extension panel. Blank. Driver 4″ wide, passenger 1″ wide. To be used with 10672011.
-
2018+389/389 Long Hood (131" BBC)3D SKIRTING – 2018+ 389 LONG HOOD
For 2018+ Peterbilt 389 models with Dynaflex exhaust. 3D one piece cab and hood extension panel. Blank. Driver 4″ wide, passenger 1″ wide. To be used with 10672011.
-
2018+389/389 Long Hood (131" BBC)3D SKIRTING – PAINTABLE – 2018+ 389 LONG HOOD
For 2018+ Peterbilt 389 models with Dynaflex exhaust. Paintable 3D one piece cab and hood extension panel. Blank. Driver 4″ wide, passenger 1″ wide. To be used with 10672013.
-
40" Sleeper Panels40" Sleeper Panels40″ SLEEPER PANELS WITH EXTENDERS
For Kenworth T680, T880 and W990 models with dual cab exhaust EXCEPT for 2024+ models with new routed exhaust. For 40″ sleepers with extenders. Measure 2.5″ wide. Plain (no lites). Will fit T680 Next Gen models with cab mounted exhaust & fuel fill access behind the sleeper. Trucks with fuel fill cutouts in OEM panels must contact customer service at …
-
40" Sleeper Panels40" Sleeper Panels40″ SLEEPER PANELS WITHOUT EXTENDERS
For Kenworth T680, T880 and W990 models with cab exhaust EXCEPT for 2024+ models with new routed exhaust. Will fit T680 Next Gen models with cab mounted exhaust & fuel fill access behind the sleeper. Trucks with fuel fill cutouts in OEM panels must contact customer service at info@panelite.com. Fit 40″ sleepers without extenders. Blank (no lites). Measure 2.5″ wide.
-
2007-20082009-201344″ SLEEPER PANELS
For 1973+ Peterbilt 359, 367, 377, 379, 388 and 389 models with 36″ (44″ new) sleepers. Not for 2018+ 389 long hood (131″ BBC). Will also fit 567 and 579 models with cab mount exhaust EXCEPT for 2024+ models with new routed exhaust. For 386 models without fairings. Measures 3″ wide. Blank (no lites). Sold in pairs.
-
Peterbilt56744″ SLEEPER PANELS
For Peterbilt 567 and 579 models (including New Model/MLU 579) with underbody exhaust and chassis fairings. Not for models with EPIQ package or UltraLoft models. For 44″ sleepers. Blank (no lites). Sold in pairs. Measure 2.5″ wide.
-
2018+389/389 Long Hood (131" BBC)44″ SLEEPER PANELS – 2018+ 389 LONG HOOD
For 2018+ Peterbilt 389 long hood (131″ BBC) models with 44″ sleepers. Blank. Sold in pairs. Measure 4″ wide. With wrap.
-
2007-20082009-201344″ SLEEPER PANELS – 4″ WIDE
For 1973+ Peterbilt 359, 367, 377, 379, 388 and 389 models with 36″ (44″ new) sleepers. Not for 2018+ 389 long hood (131″ BBC). Will also fit 567 and 579 models with cab mount exhaust EXCEPT for 2024+ models with new routed exhaust. For 386 models without fairings. Measures 4″ wide. Blank (no lites). Sold in pairs.
-
Peterbilt56744″ SLEEPER PANELS WITH EXTENDERS
For Peterbilt 567 and 579 models (including New Model/MLU 579) with underbody exhaust and chassis fairings. Not for models with the EPIQ package or UltraLoft models. For 44″ sleepers with extenders. Blank (no lites). Sold in pairs. Measure 2.5″ wide.
-
44" Sleeper44" Sleepers44″ SLEEPER PANELS WITH EXTENDERS – CAB MOUNT EXHAUST
For Peterbilt 567, 579 and 589 cab mount exhaust models with 44″ sleepers with extenders EXCEPT for 2024+ models with new routed exhaust. Not for UltraLoft or models with EPIQ package. Blank (no lites). Measure 3″ wide.
-
Western Star49X48″ SLEEPER PANELS – WESTERN STAR 49X
For Western Star 49X models with 48″ sleepers. Designed to be used on trucks with cab mount exhaust. Blank (no lites). Measure 3″ wide.
-
52" Sleeper Panels52" Sleeper Panels52″ SLEEPER PANELS – CAB EXHAUST
For Kenworth T680, T880 and W990 models with cab exhaust and 52″ sleepers without extenders. Will NOT Fit 2024+ models with new routed exhaust. Will fit T680 Next Gen models with cab mounted exhaust & fuel fill access behind the sleeper. Trucks with fuel fill cutouts in OEM panels must contact customer service at info@panelite.com. Blank (no lites). Measure 2.5″ wide.
-
52" Sleeper Panels52" Sleeper Panels52″ SLEEPER PANELS – UNDERBODY EXHAUST
For Kenworth T680, T880 and W990 models with underbody exhaust and 52″ sleepers without extenders. Will not fit MLU/T680 Next Gen models. Blank (no lites). Measure 2.5″ wide.
-
52" Sleeper Panels52" Sleeper Panels52″ SLEEPER PANELS WITH EXTENDERS- DUAL CAB EXHAUST
For Kenworth T680, T880 and W990 models with dual cab exhaust and 52″ sleepers with extenders. Will NOT fit 2024+ models with new routed exhaust. Will fit T680 Next Gen models with cab mounted exhaust & fuel fill access behind the sleeper. Trucks with fuel fill cutouts in OEM panels must contact customer service at info@panelite.com. Blank (no lites). Measure …
-
2022+ CAB EXHAUST567567 SET-FORWARD AXLE CAB EXHAUST CAB PANELS
For 2022+ Peterbilt 567 set-forward axle cab exhaust models. Sold in pairs. Blank. Measure 3″ wide and 36.42″ long.
-
2022+ CAB EXHAUST567567 SET-FORWARD AXLE CAB EXHAUST CAB PANELS
For 2022+ Peterbilt 567 set-forward axle cab exhaust models. Sold in pairs. Blank. Block heater. Measure 3″ wide and 36.42″ long.
-
Peterbilt579579 ULTRALOFT SHORT HOOD (117″ BBC) CAB PANELS
For Peterbilt 579 Ultraloft short hood (117″ BBC) models. Will not fit New Model/MLU 579 Ultraloft models. Blank (no lites).
-
Peterbilt579579 ULTRALOFT SHORT HOOD (117″ BBC) CAB PANELS
For Peterbilt 579 Ultraloft short hood (117″ BBC) models. Will not fit New Model/MLU 579 Ultraloft models. Blank (no lites). Block heater.
-
Peterbilt579579 ULTRALOFT SHORT HOOD (117″ BBC) CAB PANELS
For Peterbilt 579 Ultraloft short hood (117″ BBC) models. Will not fit New Model/MLU 579 Ultraloft models. Blank (no lites). Block heater cutouts.
-
2007-20082009-201358″ BLANK SLEEPER PANELS
For Peterbilt 379, 388 and 389* models with 58″ sleepers (48″ old sleeper size). *Not for 2018+ 389 long hood (131″ BBC). Sold in pairs. Blank (no lites). Measure 4″ wide.
-
2018+389/389 Long Hood (131" BBC)58″ BLANK SLEEPER PANELS
For 2018+ Peterbilt 389 long hood (131″ BBC) models. For 58″ sleepers. Measure 3″ wide.
-
Peterbilt56758″ SLEEPER PANELS
For Peterbilt 579 (including New Model/MLU 579) and 567 models with underbody exhaust and chassis fairings. Not for models with EPIQ package or UltraLoft models. For 58″ sleepers. Blank (no lites). Measure 2.5″ wide.
-
2009-201338658″ SLEEPER PANELS
For 2009+ Peterbilt 386 models as well as 2009-2013 Peterbilt 389 models. For 48″ (58″ new) sleepers. Blank (no lites). Measure 2.5″ wide.
-
2007-20082009-201358″ SLEEPER PANELS
For 1987+ Peterbilt 359, 367, 377, 379, 388 and 389* models with 48″ (58″ new) sleepers. Will also fit 567 and 579 models with cab mount exhaust EXCEPT for 2024+ models with new routed exhaust. For 386 models without fairings. Measures 3″ wide. Blank (no lites). Sold in pairs. *Not for 2018+ 389 long hood (131″ BBC).
-
2018+389/389 Long Hood (131" BBC)58″ SLEEPER PANELS – 2018+ 389 LONG HOOD
For 2018+ Peterbilt 389 long hood (131″ BBC) models. Blank. Sold in pairs. Measure 4″ wide. With wrap.
-
Peterbilt56758″ SLEEPER PANELS WITH EXTENDERS
For Peterbilt 567 and 579 models (including New Model/MLU 579) with underbody exhaust and chassis fairings. Will not fit on models with the EPIQ package or UltraLoft models. For 58″ sleepers with extenders. Blank (no lites). Measure 2.5″ wide.
-
56757958″ SLEEPER PANELS WITH EXTENDERS
For Peterbilt 579 models with cab mounted exhaust and no chassis fairings. Also fits 567 cab exhaust models as well as 589 models. Will NOT fit 2024+ models with new routed exhaust. For 58″ sleepers with extenders. Blank (no lites). Sold in pairs. Measure 3″ wide.
-
589Cab Panels589 CAB PANELS – BLANK
For Peterbilt 589 models. Fit both short hood (121″ BBC) and long hood (131″ BBC). Blank.
-
589Cab Panels589 CAB PANELS – BLANK – BLOCK HEATER
For Peterbilt 589 models. Fit both short hood (121″ BBC) and long hood (131″ BBC). Blank. Block heater.
-
Western Star49X60″ SLEEPER PANELS – WESTERN STAR 49X
For Western Star 49X models with 60″ sleepers. Designed to be used on trucks with cab mount exhaust. Blank (no lites). Measure 3″ wide.
-
62" Sleeper Panels62" Sleeper Panels62″ SLEEPER PANELS
For EPA 2007+ Kenworth T800 Aerocab and W900 Aerocab models with 62″ sleepers. Blank (no lites).
-
62" Sleeper Panels62" Sleeper Panels62″ SLEEPER PANELS
For 1995-2006 Kenworth T800 (Aerocab) and W900 (Aerocab) models, 1995+ T600 Aerocab models with no side fairings. For 62″ sleepers. Blank.
-
KenworthSleeper Panels62″ SLEEPER PANELS WITH EXTENDERS
For 2007+ Kenworth T660 models with side mount exhaust. For 62″ sleepers with extender. Blank (no lites).
-
AnthemMack70″ SLEEPER SKIRTS – MACK ANTHEM
For Mack Anthem models with 70″ sleepers. Will work on models with or without chassis fairings. OEM replacement. Blank. Sold in pairs.
-
2007-20082009-201372″ SLEEPER PANELS
For 1987+ Peterbilt 367, 359, 377, 379, 388 and 389* models with 63″ (72″ new) sleepers. Will also fit 567 and 579 models with cab mount exhaust EXCEPT for 2024+ models with new routed exhaust.. For 386 models without fairings. Measures 3″ wide. Blank (no lites). Sold in pairs. *Will not fit 2018+ 389 long hood (131″ BBC) models due …
-
72" Sleeper Panels72" Sleeper Panels72″ SLEEPER PANELS
For EPA 2007+ Kenworth T800 Aerocab and W900 Aerocab models with 72″ sleepers. Blank (no lites).
-
72" Sleeper Panels72" Sleeper Panels72″ SLEEPER PANELS
For 1995-2006 Kenworth T800 (Aerocab) and W900 (Aerocab) models, 1995+ T600 Aerocab models with no side fairings. For 72″ sleepers. Blank.
-
Peterbilt56772″ SLEEPER PANELS
For Peterbilt 567 and 579 models (including New Model/MLU 579) with underbody exhaust and chassis fairings. Will not fit on models with the EPIQ package or UltraLoft models. For 72″ sleepers. Blank (no lites). Sold in pairs. Measure 2.5″ wide.
-
2009-201338672″ SLEEPER PANELS
For 2009+ Peterbilt 386 models as well as 2009-2013 Peterbilt 389 models. For 63″ (72″ new) sleepers. Blank (no lites). Measure 2.5″ wide.
-
2018+389/389 Long Hood (131" BBC)72″ SLEEPER PANELS – 2018+ 389 LONG HOOD
For 2018+ Peterbilt 389 long hood (131″ BBC) with 72″ sleepers. Sold in pairs. Blank. Measure 3″ wide. With wrap.
-
2018+389/389 Long Hood (131" BBC)72″ SLEEPER PANELS – 2018+ 389 LONG HOOD
For 2018+ Peterbilt 389 long hood (131″ BBC) models with 72″ sleepers. Sold in pairs. Blank. Measure 4″ wide. With wrap.
-
Peterbilt57972″ SLEEPER PANELS – EPIQ PACKAGE
For Peterbilt 579 models with the EPIQ Package. Fit 72″ sleepers with extenders. To be used with filler panel 10962032. Blank. 2.5″ wide.
-
Western Star49X72″ SLEEPER PANELS – WESTERN STAR 49X
For Western Star 49X models with 72″ sleepers. Designed to be used on trucks with cab mount exhaust. Blank (no lites). Measure 3″ wide.
-
KenworthSleeper Panels72″ SLEEPER PANELS WITH EXTENDERS
For 2007+ Kenworth T660 models with side mount exhaust. For 72″ sleepers with extender. Blank (no lites).
-
56757972″ SLEEPER PANELS WITH EXTENDERS
For Peterbilt 579 cab exhaust models with no chassis fairings. For 567 cab exhaust models as well as 589 models. Will NOT fit 2024+ models with new routed exhaust. Fit 72″ sleepers with extenders. Blank (no lites). Sold in pairs. Measure 3″ wide.
-
Peterbilt56772″ SLEEPER PANELS WITH EXTENDERS
For Peterbilt 567 and 579 models (including New Model/MLU 579) with underbody exhaust and chassis fairings. Will not fit on models with the EPIQ package or UltraLoft models. For 72″ sleepers with extenders. Blank (no lites). Sold in pairs. Measure 2.5″ wide.
-
76" Sleeper Panels76" Sleeper Panels76″ SLEEPER PANELS – DUAL CAB EXHAUST
For Kenworth T680, T880 and W990 models with dual cab exhaust and 76″ sleepers without extenders. Will NOT fit 2024+ models with new routed exhaust. Will fit T680 Next Gen models with cab mounted exhaust & fuel fill access behind the sleeper. Trucks with fuel fill cutouts in OEM panels must contact customer service at info@panelite.com. Blank (no lites). Measure 2.5″ …
-
76" Sleeper Panels76" Sleeper Panels76″ SLEEPER PANELS – UNDERBODY EXHAUST
For Kenworth T680, T880 and W990 models with underbody exhaust and 76″ sleepers without extenders. Will not fit MLU/T680 Next Gen models. Blank (no lites). Measure 2.5″ wide.
-
76" Sleeper Panels76" Sleeper Panels76″ SLEEPER PANELS WITH EXTENDERS
For Kenworth T680 and T880 underbody exhaust models with 76″ sleepers and extender. To be used in conjunction with transition panels. Will not fit MLU/T680 Next Gen models. Blank (no lites). Measure 2.5″ wide.
-
76" Sleeper Panels76" Sleeper Panels76″ SLEEPER PANELS WITH EXTENDERS – DUAL CAB EXHAUST
For Kenworth T680, T880 and W990 models with dual cab exhaust and 76″ sleepers with extenders. Will NOT fit 2024+ models with new routed exhaust. Will fit T680 Next Gen models with cab mounted exhaust & fuel fill access behind the sleeper. Trucks with fuel fill cutouts in OEM panels must contact customer service at info@panelite.com. Blank (no lites). Measure 2.5″ …
-
2007-20082009-201378″ BLANK SLEEPER PANELS
For Peterbilt 379, 388 and 389* models with 70″ (78″ new) sleepers. Sold in pairs. Blank (no lites). Measure 4″ wide. *Will not fit 2018+ 389 long hood (131″ BBC) models due to exhaust interference on the passenger side.
-
36770"/78" Sleepers78″ SLEEPER PANELS
For Peterbilt 367 models with 70″ (78″ new) sleepers. To be used with extenders or end caps. Blank (no lites). Sold in pairs. Measures 4″ wide.
-
2009-201338678″ SLEEPER PANELS
For 2009+ Peterbilt 386 models as well as 2009-2013 Peterbilt 389 models. For 70″ (78″ new) sleepers. Blank (no lites). Measure 2.5″ wide.
-
2007-20082009-201378″ SLEEPER PANELS
For 1997+ Peterbilt 367, 359, 377, 379, 388 and 389* models with 70″ (78″ new) sleepers. For 386 models without fairings. Measures 3″ wide. Blank (no lites). Sold in pairs. *Will not fit 2018+ 389 long hood (131″ BBC) models due to exhaust interference on the passenger side.
-
2018+389/389 Long Hood (131" BBC)78″ SLEEPER PANELS – 2018+ 389 LONG HOOD
For 2018+ Peterbilt 389 long hood (131″ BBC) models with 78″ sleepers. Blank. 3″ wide.
-
2018+389/389 Long Hood (131" BBC)78″ SLEEPER PANELS – 2018+ 389 LONG HOOD
For 2018+ Peterbilt 389 long hood (131″ BBC) models with 78″ sleepers. Sold in pairs. Blank. Measure 4″ wide.
-
2007-20082009-201378″ SLEEPER PANELS – PAINTABLE
For Peterbilt 367, 379, 388 and 389* models with 70″ (78″ new) sleepers. Sold in pairs. Blank (no lites). Measure 4″ wide. Paintable. *Will not fit 2018+ 389 long hood (131″ BBC) models due to exhaust interference on the passenger side.
-
Peterbilt56780″ SLEEPER PANELS
For Peterbilt 579 cab exhaust models with no chassis fairings. Also fit 567 cab exhaust models. Will NOT fit 2024+ models with new routed exhaust. For 80″ sleepers. Blank (no lites). Sold in pairs. Measure 3″ wide.
-
Peterbilt56780″ SLEEPER PANELS
For Peterbilt 567 and 579 models (including New Model/MLU 579) with underbody exhaust and chassis fairings. Will not fit on models with the EPIQ package or UltraLoft models. For 80″ sleepers. Blank (no lites). Sold in pairs. Measure 2.5″ wide.
-
Peterbilt57980″ SLEEPER PANELS – EPIQ PACKAGE
For Peterbilt 579 models with the EPIQ Package. Fit 80″ sleepers with extenders. To be used with filler panel 10962032. Blank. 2.5″ wide.
-
56757980″ SLEEPER PANELS WITH EXTENDERS
For Peterbilt 589 and 579 cab exhaust models with no chassis fairings. Also fit 567 cab exhaust models. Will NOT fit 2024+ models with new routed exhaust. For 80″ sleepers with extenders. Blank (no lites). Sold in pairs. Measure 3″ wide.
-
Peterbilt56780″ SLEEPER PANELS WITH EXTENDERS
For Peterbilt 567 and 579 models (including New Model/MLU 579) with underbody exhaust and chassis fairings. Will not fit on models with the EPIQ package or UltraLoft models. For 80″ sleepers with extenders. Blank (no lites). Sold in pairs. Measure 2.5″ wide.
-
86" Sleeper Panels86" Sleeper Panels86″ SLEEPER PANELS
For EPA 2007+ Kenworth T800 Aerocab and W900 Aerocab models with 86″ sleepers. Blank (no lites).
-
2014+ - 3" & 4" wide379BLANK 4″ WIDE EXTENSION PANELS
For Peterbilt 379, 388 and 389 models. Measure 4″ wide. For 36″, 48″ and 63″ sleepers (44″, 58″ and 72″ new sleeper sizes). Blank (no lites). Sold in pairs.
-
2014+ - 3" & 4" wide379BLANK 4″ WIDE EXTENSION PANELS
For Peterbilt 379, 388 and 389 models. Measure 4″ wide. For 70″ sleepers (78″ new sleeper sizes). Blank (no lites). Sold in pairs.
-
2014+ - 3" & 4" wide379BLANK 4″ WIDE PAINTABLE EXTENSION PANELS
For Peterbilt 379, 388 and 389 models. Measure 4″ wide. For 48″ and 63″ sleepers (58″ and 72″ new sleeper sizes). Paintable. Blank (no lites). Sold in pairs.
-
2014+ - 3" & 4" wide379BLANK 4″ WIDE PAINTABLE EXTENSION PANELS
For Peterbilt 379, 388 and 389 models. Measure 4″ wide. For 70″ sleepers (78″ new sleeper sizes). Paintable. Blank (no lites). Sold in pairs.
-
2007-20082009-2013BLANK 4″ WIDE SLEEPER PANELS
For 389*, 388, 379, 367 and 365 models with 72″ sleepers (63″ old sleeper size). Plain (no lites). *Will not fit 2018+ 389 long hood (131″ BBC) models due to exhaust interference on the passenger side.
-
2011-2017388/389 Short Hood (123" BBC)BLANK CAB PANELS
For 2011-2017 Peterbilt 388 models. Sold in pairs. Measure 3″ wide. The driver side 38.45″ long, passenger side 33.45″ long. Blank (no lites).
-
2009-2010388/389 Short Hood (123" BBC)BLANK CAB PANELS
For 2009-2010 Peterbilt 388 models. Sold in pairs. Measure 3″ wide and 38.45″ long. Blank (no lites).
-
123" BBC Cab Panels567BLANK CAB PANELS FOR LONG HOOD MODELS
For 2013-2021 Peterbilt 579 long hood (123″ BBC) models with underbody exhaust and chassis fairings. Also 2013-2021 567 set-back axle long hood (121″ BBC) with underbody exhaust. Will not fit on models with the EPIQ package. Use with sleeper panels. Sold in pairs. Blank (no lites). Measure 2.5″ wide.
-
123" BBC Cab Panels567BLANK CAB PANELS FOR LONG HOOD MODELS WITH BLOCK HEATER CUTOUT
For 2013-2021 Peterbilt 579 long hood (123″ BBC) models with underbody exhaust and chassis fairings. Also 2013-2021 567 set-back axle long hood (121″ BBC) with underbody exhaust. Will not fit on models with the EPIQ package. For use with sleeper panels. Sold in pairs. Blank (no lites). Measure 2.5″ wide. Block heater cutout.
-
388/389 Short Hood (123" BBC)Cab PanelsBLANK EXTENDED DAYCAB CAB PANELS
For 2009-2017 Peterbilt 388 extended DayCab models. Sold in pairs. Measure 3″ wide and 57.43″ long. With wrap. Blank (no lites).
-
2009-2013 - 2.5" wide389/389 Long Hood (131" BBC)BLANK EXTENSION PANELS
For 2009-2013 Peterbilt 389 models. Use with 36″, 48″ and 63″ sleepers. Sold in pairs. Measure 2.5″ wide. Blank (no lites).
-
2009-2013 - 2.5" wide389/389 Long Hood (131" BBC)BLANK EXTENSION PANELS
For 2009-2013 Peterbilt 389 models. Use with 70″ (78″) Unibilt sleepers. Sold in pairs. Measure 2.5″ wide. Blank (no lites).
-
2009-2013 - 2.5" wide386BLANK EXTENSION PANELS
For 2009+ Peterbilt 386 models with chassis fairings and rear exhaust as well as 2009-2013 Peterbilt 389 models. Blank (no lites). For 70″ Unibilt sleepers. Measures 2.5″ wide. Sold in pairs.
-
2007-2008 - 3" wide2014+ - 3" & 4" wideBLANK EXTENSION PANELS
For 1997+ Peterbilt 379, 2007+ 388 models and 2007-2008 Peterbilt 389 models. For 70″ (78″ new) Unibilt sleepers. Sold in pairs. Blank (no lites). Measure 3″ wide. Hardware included.
-
2007-2008 - 3" wide2014+ - 3" & 4" wideBLANK EXTENSION PANELS
For 1987+ Peterbilt 379 models, 2007+ Peterbilt 388 models as well as 2007-2008 Peterbilt 389 models. Measure 3″ wide. For 36″, 48″ and 63″ sleepers (44″, 58″ and 72″ new sleeper sizes). Blank (no lites). Sold in pairs.
-
2007-20082009-2013BLANK PAINTABLE 63″ SLEEPER PANELS
For Peterbilt 379, 388 and 389* models with 63″ sleepers (72″ new). Measure 4″ wide. Blank (no lites). Paintable. *Will not fit 2018+ 389 long hood (131″ BBC) models due to exhaust interference on the passenger side.
-
Cab PanelsCab PanelsBLANK W900B CAB PANELS FOR STEP DPF MODELS
For 2011+ Kenworth W900B models with step DPF. Blank (no lites). Fits Aerocab and extended DayCab. Block heater cutout. Step lite cutouts. Measure 50.71″ long.
-
Cab PanelsCab PanelsBLANK W900B CAB PANELS WITH BLOCK HEATER CUTOUT
For 2011+ Kenworth W900B models with step DPF. Fits Aerocab and extended DayCab. Blank (no lites). Block heater cutout. Measure 50.71″ long.
-
1995-2006Cab PanelsBLANK W900L CAB PANELS
For 1995-2006 Kenworth W900L Aerocab models. Will also fit extended DayCabs. Blank (no lites). Measure 50.64″ long.
-
2011+Cab PanelsBLANK W900L CAB PANELS FOR STEP DPF MODELS
For 2011+ Kenworth W900L models with step DPF. Blank (no lites). Step lite cutouts. Will not fit DayCab models due to high-route exhaust.
-
2011+Cab PanelsBLANK W900L CAB PANELS FOR STEP DPF MODELS
For 2011+ Kenworth W900L models with step DPF. For extended DayCabs and Aerocabs. Blank (no lites). Step lite cutouts. Block heater cutout. Measure 51.67″ long.
-
2011+Cab PanelsBLANK W900L CAB PANELS FOR STEP DPF MODELS
For 2011+ Kenworth W900L models with step DPF. Will not fit DayCabs due to high-route exhaust. Blank (no lites). Block heater cutouts. Step lite cutouts. Measure 51.67″ long.
-
2011+Cab PanelsBLANK W900L CAB PANELS FOR STEP DPF MODELS
For 2011+ Kenworth W900L models with step DPF. Fits Aerocab and extended DayCab. Blank (no lites). Block heater cutout. Measure 51.67″ long.
-
52" SLEEPERS WITHOUT EXTENDERSKenworthCAB EXHAUST 52″ SLEEPER PANELS – 5″ WIDE
For Kenworth W990 cab exhaust models with 52″ sleepers without extenders. Will NOT fit 2024+ models with new routed exhaust. Blank. Measure 5″ wide. Sold in pairs.
-
52" SLEEPERS WITHOUT EXTENDERSKenworthCAB EXHAUST 52″ SLEEPER PANELS – 5″ WIDE PAINTABLE
For Kenworth W990 cab exhaust models with 52″ sleepers without extenders. Will NOT fit 2024+ models with new routed exhaust. Blank. Measure 5″ wide. Sold in pairs. Paintable.
-
76" SLEEPERS WITHOUT EXTENDERSKenworthCAB EXHAUST 76″ SLEEPER PANELS – 5″ WIDE
For Kenworth W990 cab exhaust models with 76″ sleepers without extenders. Will NOT fit 2024+ models with new routed exhaust. Blank. Measure 5″ wide. Sold in pairs.
-
76" SLEEPERS WITHOUT EXTENDERSKenworthCAB EXHAUST 76″ SLEEPER PANELS – 5″ WIDE PAINTABLE
For Kenworth W990 cab exhaust models with 76″ sleepers without extenders. Will NOT fit 2024+ models with new routed exhaust. Blank. Measure 5″ wide. Sold in pairs. Paintable.
-
Peterbilt579CAB PANEL – NEW MODEL 579 118″ BBC ULTRALOFT & EPIQ
For Peterbilt 118″ BBC New Model/MLU 579 with Ultraloft or EPIQ package. Blank. Measure 2.5″ wide.
-
Peterbilt579CAB PANEL – NEW MODEL 579 118″ BBC ULTRALOFT & EPIQ
For Peterbilt 118″ BBC New Model/MLU 579 with Ultraloft or EPIQ package. Blank. Block heater cutout. Measure 2.5″ wide.
-
Peterbilt579CAB PANEL – NEW MODEL 579 118″ BBC ULTRALOFT & EPIQ
For Peterbilt 118″ BBC New Model/MLU 579 with Ultraloft or EPIQ package. Blank. Two block heater cutouts. Measure 2.5″ wide.
-
Cab PanelsCATCAB PANELS
For 2012+ CT660 122 BBC single exhaust models. Driver side heater cutout. Blank (no lites).
-
Cab PanelsCATCAB PANELS
For 2012+ CT660 116 BBC single exhaust models. Driver side heater cutout. Blank (no lites).
-
Cab PanelsCATCAB PANELS
For 2012+ CT660 116 BBC dual exhaust models. Driver side heater cutout. Blank (no lites).
-
2013+Cab PanelsCAB PANELS
For 2013+ Kenworth T660 models. Blank (no lites). For use without sleeper panels. Block heater cutout.
-
2013+Cab PanelsCAB PANELS
For 2013+ Kenworth T660 models. Blank (no lites). For use without sleeper panels. Step lite cutouts. Block heater cutout.
-
2010-20122013+CAB PANELS
For 2010+ Kenworth T660 models. Not to be used with sleeper panels. Blank.
-
2010-2012Cab PanelsCAB PANELS
For 2010-2012 Kenworth T660 models. Not to be used with sleeper panels. Blank. Block heater cutout.
-
2018+389/389 Long Hood (131" BBC)CAB PANELS – 2018+ 389 LONG HOOD (131″ BBC) – USE WITH OEM COWL
For 2018+ Peterbilt 389 Long Hood (131″ BBC) models. Must be used with the OEM cowl/hood extension panels. Sold in pairs. Blank. Driver side measures 4″ wide and 42.85″ long. Passenger side measures 1.25″ wide and 42.88″ long.
-
Western Star47XCAB PANELS – 47X SBA DAYCAB
For Western Star 47x set-back axle daycab models with underbody exhaust. Sold in pairs. Blank. 3″ wide.
-
Western Star47XCAB PANELS – 47X SBA DAYCAB
For Western Star 47x set-back axle daycab models with underbody exhaust. Sold in pairs. Blank. 5″ wide.
-
Western Star47XCAB PANELS – 47X SBA DAYCAB
For Western Star 47x set-back axle daycab models with underbody exhaust. Sold in pairs. Blank. 5″ wide. Block heater cutout.
-
Western Star47XCAB PANELS – 47X SFA DAYCAB
For Western Star 47x set-forward axle daycab models with underbody exhaust. Sold in pairs. Blank (no lites). Measure 3″ wide.
-
Western Star47XCAB PANELS – 47X SFA DAYCAB
For Western Star 47x set-forward axle daycab models with underbody exhaust. Sold in pairs. Blank (no lites). Measure 5″ wide.
-
Western Star47XCAB PANELS – 47X SFA DAYCAB
For Western Star 47x set-forward axle daycab models with underbody exhaust. Sold in pairs. Blank (no lites). Measure 5″ wide. Block heater cutout.
-
2022+ ULTRALOFT567CAB PANELS – 567 SET-FORWARD AXLE ULTRALOFT
For 2022+ Peterbilt 567 set-forward axle Ultraloft models. Sold in pairs. Blank. Measure 2.5″ wide and 36.76″ long. Two block heater cutouts.
-
2022+ ULTRALOFT567CAB PANELS – 567 SET-FORWARD AXLE ULTRALOFT
For 2022+ Peterbilt 567 set-forward axle Ultraloft models. Sold in pairs. Blank. Measure 2.5″ wide and 36.76″ long.
-
Peterbilt579CAB PANELS – 579 ULTRALOFT 123″ BBC
For Peterbilt 579 Ultraloft 123″ BBC models. Will not fit New Model/MLU 579 Ultraloft models. Blank. Measure 2.5″ wide.
-
Peterbilt579CAB PANELS – 579 ULTRALOFT 123″ BBC
For Peterbilt 579 Ultraloft 123″ BBC models. Will not fit New Model/MLU 579 Ultraloft models.Blank. Measure 2.5″ wide. Block heater cutout.
-
Peterbilt579CAB PANELS – 579 ULTRALOFT 123″ BBC
For Peterbilt 579 Ultraloft 123″ BBC models. Will not fit New Model/MLU 579 Ultraloft models. Blank. Measure 2.5″ wide. Block heater cutouts.
-
Cab PanelsCAB PANELSCAB PANELS – DUAL CAB EXHAUST
For Kenworth T680, T880 and W990 models with dual cab exhaust. Will not fit 2024+ DayCab models. Will not fit the MLU/T680 Next Gen model. Blank (no lites). Block heater cutout.
-
Cab PanelsCAB PANELSCAB PANELS – DUAL CAB EXHAUST
For Kenworth T680, T880 and W990 models with dual cab exhaust. Will not fit 2024+ DayCab models. Will not fit the MLU/T680 Next Gen model. Blank (no lites). Block heater cutouts.
-
CAB PANELSCab PanelsCAB PANELS – DUAL CAB EXHAUST
For Kenworth T680, T880 and W990 models with dual cab exhaust. Will not fit 2024+ DayCab models. Will not fit the MLU/T680 Next Gen model. Blank (no lites).
-
Peterbilt579CAB PANELS – EPIQ PACKAGE
For 2013-2021 Peterbilt 579 117″ BBC models with EPIQ Package. Blank. 2.5″ wide.
-
Peterbilt579CAB PANELS – EPIQ PACKAGE
For 2013-2021 Peterbilt 579 117″ BBC models with EPIQ Package. Blank. 2.5″ wide. Block heater cutout.
-
Cab PanelsHX SeriesCAB PANELS – HX520 WITH DUAL EXHAUST
For pre-2022 International HX520 models with dual cab exhaust. Will not fit 2022+ models. Sold in pairs. Plain (no lites). Measure 4″ wide. Block heater cutout.
-
Cab PanelsMackCAB PANELS – MACK CHU WITH SIDE MOUNT EXHAUST
For Mack CH models with side mount exhaust. Plain. Block heater cutout. OEM version.
-
Peterbilt579CAB PANELS – NEW MODEL 579 124″ BBC ULTRALOFT & EPIQ
For Peterbilt 124″ BBC New Model/MLU 579 with Ultraloft or EPIQ package. Blank. Measure 2.5″ wide.
-
Peterbilt579CAB PANELS – NEW MODEL 579 124″ BBC ULTRALOFT & EPIQ
For Peterbilt 124″ BBC New Model/MLU 579 with Ultraloft or EPIQ package. Blank. Measure 2.5″ wide. Block heater cutout.
-
Peterbilt579CAB PANELS – NEW MODEL 579 124″ BBC ULTRALOFT & EPIQ
For Peterbilt 124″ BBC New Model/MLU 579 with Ultraloft or EPIQ package. Blank. Measure 2.5″ wide. Block heater cutouts.
-
Peterbilt579CAB PANELS – SHORT HOOD
For 2013-2021 Peterbilt 579 short hood (117″ BBC) models with cab mount exhaust and no chassis fairings. Blank (no lites). Sold in pairs. Measure 3″ wide.
-
Peterbilt579CAB PANELS – SHORT HOOD
For 2013-2021 Peterbilt 579 short hood (117″ BBC) models with cab mount exhaust and no chassis fairings. Blank (no lites). Sold in pairs. Measure 3″ wide. Block heater cutout.
-
567567 Short Hood (115" BBC) Set-Back Axle Cab PanelsCAB PANELS – SHORT HOOD WITH SET-BACK AXLE
For 2013-2021 Peterbilt 567 short hood (115″ BBC) models with set-back axle and cab mount exhaust. Blank (no lites). Sold in pairs. Measure 2.85″ wide. Block heaters.
-
567567 Short Hood (115" BBC) Set-Back Axle Cab PanelsCAB PANELS – SHORT HOOD WITH SET-BACK AXLE
For 2013-2021 Peterbilt 567 short hood (115″ BBC) models with set-back axle and cab mount exhaust. Blank (no lites). Sold in pairs. Measure 2.85″ wide.
-
567567 Short Hood (115" BBC) Set-Back Axle Cab PanelsCAB PANELS – SHORT HOOD WITH SET-BACK AXLE
For 2013-2021 Peterbilt 567 short hood (115″ BBC) models with set-back axle and cab mount exhaust. Blank (no lites). Sold in pairs. Measure 2.85″ wide. Block heater.
-
Cab PanelsKenworthCAB PANELS – T680 NEXT GEN MID-HOOD
For 2022+ Kenworth T680 Next Gen models with mid-hood. For underbody exhaust models – not designed for cab mount exhaust or daycab models. Blank (no lights). Sold in pairs.
-
Cab PanelsKenworthCAB PANELS – T680 NEXT GEN SHORT HOOD
For 2022+ Kenworth T680 Next Gen models with short hood. For underbody exhaust models – not designed for cab mount exhaust or daycab models. Blank (no lights). Sold in pairs.
-
Cab PanelsCAB PANELSCAB PANELS – UNDERBODY EXHAUST
For Kenworth T680, T880 and W990 models. Will not fit the MLU/T680 Next Gen model. Will not fit 2024+ DayCab models. For use on underbody exhaust models with sleepers. Blank (no lites). Block heater cutout.
-
Peterbilt567CAB PANELS -567 SET-FORWARD AXLE WITH CAB EXHAUST
For 2018-2021 Peterbilt 567 set-forward axle models with cab exhaust. Blank. Measure 35.55″ long. Driver 4″ wide, passenger 2.75″ wide.
-
Peterbilt567CAB PANELS -567 SET-FORWARD AXLE WITH CAB EXHAUST
For 2018-2021 Peterbilt 567 set-forward axle models with cab exhaust. Blank. Driver 4″ wide, passenger 2.75″, both measure 35.55″ long. Block heater cutout.
-
Peterbilt386CAB PANELS FOR CAB MOUNT EXHAUST
For 2005+ Peterbilt 386 models with cab mount exhaust. Measures 2.5″ wide and 40″ long. Blank (no lites). Sold in pairs.
-
Peterbilt386CAB PANELS FOR REAR MOUNT EXHAUST
For 2005+ Peterbilt 386 models with rear mount exhaust. Measure 43.75″ long and 2.5″ wide. Sold in pairs. Blank (no lites).
-
Cab PanelsISX EngineCAB PANELS FOR STEP DPF MODELS WITH ISX ENGINE
For 2012+ Kenworth T800 split fender models with step DPF with ISX engines. Blank (no lites). Block heater cutout.
-
2018+388/389 Short Hood (123" BBC)CAB PANELS FOR USE WITH OEM HOOD EXTENSION PANEL
For 2018+ Peterbilt 389 Short Hood (123″ BBC) models. Must be used with the OEM cowl. Sold in pairs. Blank.
-
Cab PanelsCascadiaCASCADIA DAYCAB CAB PANELS
For 2018+ Cascadia daycab models. Sold in pairs. Blank. Block heater cutout.
-
Blank
Showing 1–160 of 231 results
275 Industrial Road
Cambridge, Ontario N3H 4R7
Phone: 1-800-331-7952
© 2025 High Bar Brands All Rights Reserved