-
86" Sleeper Panels86" Sleeper Panels
86″ SLEEPER SKIRTS WITH EXTENDER
For 2008+ Kenworth W900 and T800 models with 86″ sleepers with extenders. Will fit models with studio bunks. Plain (no lights).
-
589Hood Extension Panels
BLANK – PETERBILT 589 SHORT HOOD (121″ BBC) HOOD EXTENSION PANELS
For Peterbilt 589 short hood (121″ BBC) models. Blank (no lites).
-
589Hood Extension Panels
BLANK HOOD EXTENSION PANEL – PETERBILT 589 LONG HOOD
For Peterbilt 589 long hood (131″ BBC) models. Blank.
-
KenworthT680
KENWORTH T680 HIGH-ROOF WITH 76″ SLEEPERS SKIRTING KIT
For 2013-2020 high-roof T680 models with 76″ sleepers with extenders. Will not fit MLU/T680 Next Gen models. Plain (no lights). Measure 2.5″ wide.
-
72" Sleeper Panels72" Sleeper Panels
KENWORTH T800 & W900 AEROCAB 72″ SLEEPER SKIRTS
For 72″ sleepers on Aerocab EPA T800 and W900 2007+ models. Plain.
-
72" Sleeper PanelsKenworth
KENWORTH T800 AEROCAB 72″ SLEEPER SKIRTS
For 2011+ Kenworth T800 Aerocab models with 72″ sleepers with extenders. Plain.
-
1995-2006Cab Panels
KICK PANEL CAB PANELS – KENWORTH W900 AEROCAB
For pre-2010 (pre-EPA) Kenworth W900 models. Plain, no lites. Block heater.
-
1995-2006Cab Panels
PRE-2010 KENWORTH W900 AEROCAB CAB PANELS
For pre-EPA (2010) Aerocab models. Plain (no lights).
-
1995-20062011+
REPLACEMENT STAINLESS STEEL KICK PLATE – KENWORTH W900 PRE-2010
For pre-EPA 2010 models. Without block heater hole.
-
1995-20062011+
REPLACEMENT STAINLESS STEEL KICK PLATE – KENWORTH W900 PRE-2010 WITH BLOCK HEATER CUTOUT
For pre-EPA 2010 models. Without block heater hole.
-
2011+Cab Panels
W900L AEROCAB PANELS – UNDERBODY DPF
For 2011+ W900L models with underbody DPF. Will not fit DayCab models due to high-route exhaust. Plain.
-
Peterbilt389/389 Long Hood (131" BBC)
1.75″ WIDE CAB PANELS
For 2014-2017 Peterbilt 389 Long Hood (131″ BBC) models. For models with fuel tank mounted steps. Sold in pairs. Measures 1.75″ wide and 43.13″ long. Blank (no lites).
-
Peterbilt389/389 Long Hood (131" BBC)
2.5″ CAB PANELS
For 2009-2013 Peterbilt 389 models. Sold in pairs. Measure 2.5″ wide and 44.54″ long. Blank (no lites).
-
2018+367
2018+ PETERBILT 367 SET-BACK AXLE EXTENDED DAYCAB CAB PANELS
For 2018+ Peterbilt 367 set-back axle extended daycab models with dual exhaust. Plain. Measures 3″ wide with wrap.
-
2018+367
2018+ PETERBILT 367 SET-BACK AXLE EXTENDED DAYCAB CAB PANELS
For 2018+ Peterbilt 367 set-back axle extended daycab models with dual exhaust. Plain. Block heater cutout. Measures 3″ wide with wrap.
-
2007-20082007-2008
3″ WIDE CAB PANELS
For 1987+ Peterbilt 379. Also 388 and 389 models from 2007-2008. Sold in pairs. Measure 43.13″ long and 3″ wide. Blank (no lites).
-
2007-20082007-2008
3″ WIDE EXTENDED CAB PANELS
For 1987+ Peterbilt 379. Also 388 and 389 models from 2007-2008. Sold in pairs. Extended. Measure 54.05″ long and 3″ wide. Blank (no lites).
-
2018+367
367 CAB PANELS – SET-BACK AXLE WITH DUAL EXHAUST – 2018+
For 2018+ Peterbilt 367 set-back axle models with dual exhaust. Plain. Block heater cutout. Driver side 50″ long, passenger side 52″ long. Both 3″ wide.
-
38" Sleeper Panels38" Sleeper Panels
38″ SLEEPER PANELS
For 2007+ EPA T800 Aerocab and W900 Aerocab models with 38″ sleepers. Blank (no lites).
-
40" Sleeper Panels40" Sleeper Panels
40″ SLEEPER PANELS WITH EXTENDERS
For Kenworth T680, T880 and W990 models with dual cab exhaust EXCEPT for 2024+ models with new routed exhaust. For 40″ sleepers with extenders. Measure 2.5″ wide. Plain (no lites). Will fit T680 Next Gen models with cab mounted exhaust & fuel fill access behind the sleeper. Trucks with fuel fill cutouts in OEM panels must contact customer service at …
-
40" Sleeper Panels40" Sleeper Panels
40″ SLEEPER PANELS WITHOUT EXTENDERS
For Kenworth T680, T880 and W990 models with cab exhaust EXCEPT for 2024+ models with new routed exhaust. Will fit T680 Next Gen models with cab mounted exhaust & fuel fill access behind the sleeper. Trucks with fuel fill cutouts in OEM panels must contact customer service at info@panelite.com. Fit 40″ sleepers without extenders. Blank (no lites). Measure 2.5″ wide.
-
Peterbilt367
44″ SLEEPER PANELS
For 1973+ Peterbilt 359, 367, 377, 379, 388 and 389 models with 36″ (44″ new) sleepers. Not for 2018+ 389 long hood (131″ BBC). Will also fit 567 and 579 models with cab mount exhaust EXCEPT for 2024+ models with new routed exhaust. For 386 models without fairings. Measures 3″ wide. Blank (no lites). Sold in pairs.
-
2007-20082009-2013
44″ SLEEPER PANELS – 4″ WIDE
For 1973+ Peterbilt 359, 367, 377, 379, 388 and 389 models with 36″ (44″ new) sleepers. Not for 2018+ 389 long hood (131″ BBC). Will also fit 567 and 579 models with cab mount exhaust EXCEPT for 2024+ models with new routed exhaust. For 386 models without fairings. Measures 4″ wide. Blank (no lites). Sold in pairs.
-
44" Sleeper44" Sleepers
44″ SLEEPER PANELS WITH EXTENDERS – CAB MOUNT EXHAUST
For Peterbilt 567, 579 and 589 cab mount exhaust models with 44″ sleepers with extenders EXCEPT for 2024+ models with new routed exhaust. Not for UltraLoft or models with EPIQ package. Blank (no lites). Measure 3″ wide.
-
52" Sleeper Panels52" Sleeper Panels
52″ SLEEPER PANELS – CAB EXHAUST
For Kenworth T680, T880 and W990 models with cab exhaust and 52″ sleepers without extenders. Will NOT Fit 2024+ models with new routed exhaust. Will fit T680 Next Gen models with cab mounted exhaust & fuel fill access behind the sleeper. Trucks with fuel fill cutouts in OEM panels must contact customer service at info@panelite.com. Blank (no lites). Measure 2.5″ wide.
-
52" Sleeper Panels52" Sleeper Panels
52″ SLEEPER PANELS – UNDERBODY EXHAUST
For Kenworth T680, T880 and W990 models with underbody exhaust and 52″ sleepers without extenders. Will not fit MLU/T680 Next Gen models. Blank (no lites). Measure 2.5″ wide.
-
52" Sleeper Panels52" Sleeper Panels
52″ SLEEPER PANELS WITH EXTENDERS- DUAL CAB EXHAUST
For Kenworth T680, T880 and W990 models with dual cab exhaust and 52″ sleepers with extenders. Will NOT fit 2024+ models with new routed exhaust. Will fit T680 Next Gen models with cab mounted exhaust & fuel fill access behind the sleeper. Trucks with fuel fill cutouts in OEM panels must contact customer service at info@panelite.com. Blank (no lites). Measure …
-
Peterbilt388/389 Short Hood (123" BBC)
58″ BLANK SLEEPER PANELS
For Peterbilt 379, 388 and 389* models with 58″ sleepers (48″ old sleeper size). *Not for 2018+ 389 long hood (131″ BBC). Sold in pairs. Blank (no lites). Measure 4″ wide.
-
Peterbilt367
58″ SLEEPER PANELS
For 1987+ Peterbilt 359, 367, 377, 379, 388 and 389* models with 48″ (58″ new) sleepers. Will also fit 567 and 579 models with cab mount exhaust EXCEPT for 2024+ models with new routed exhaust. For 386 models without fairings. Measures 3″ wide. Blank (no lites). Sold in pairs. *Not for 2018+ 389 long hood (131″ BBC).
-
Peterbilt589
58″ SLEEPER PANELS WITH EXTENDERS
For Peterbilt 579 models with cab mounted exhaust and no chassis fairings. Also fits 567 cab exhaust models as well as 589 models. Will NOT fit 2024+ models with new routed exhaust. For 58″ sleepers with extenders. Blank (no lites). Sold in pairs. Measure 3″ wide.
-
589Cab Panels
589 CAB PANELS – BLANK
For Peterbilt 589 models. Fit both short hood (121″ BBC) and long hood (131″ BBC). Blank.
-
589Cab Panels
589 CAB PANELS – BLANK – BLOCK HEATER
For Peterbilt 589 models. Fit both short hood (121″ BBC) and long hood (131″ BBC). Blank. Block heater.
-
62" Sleeper Panels62" Sleeper Panels
62″ SLEEPER PANELS
For EPA 2007+ Kenworth T800 Aerocab and W900 Aerocab models with 62″ sleepers. Blank (no lites).
-
62" Sleeper Panels62" Sleeper Panels
62″ SLEEPER PANELS
For 1995-2006 Kenworth T800 (Aerocab) and W900 (Aerocab) models, 1995+ T600 Aerocab models with no side fairings. For 62″ sleepers. Blank.
-
KenworthSleeper Panels
62″ SLEEPER PANELS WITH EXTENDERS
For 2007+ Kenworth T660 models with side mount exhaust. For 62″ sleepers with extender. Blank (no lites).
-
AnthemMack
70″ SLEEPER SKIRTS – MACK ANTHEM
For Mack Anthem models with 70″ sleepers. Will work on models with or without chassis fairings. OEM replacement. Blank. Sold in pairs.
-
Peterbilt367
72″ SLEEPER PANELS
For 1987+ Peterbilt 367, 359, 377, 379, 388 and 389* models with 63″ (72″ new) sleepers. Will also fit 567 and 579 models with cab mount exhaust EXCEPT for 2024+ models with new routed exhaust.. For 386 models without fairings. Measures 3″ wide. Blank (no lites). Sold in pairs. *Will not fit 2018+ 389 long hood (131″ BBC) models due …
-
72" Sleeper Panels72" Sleeper Panels
72″ SLEEPER PANELS
For EPA 2007+ Kenworth T800 Aerocab and W900 Aerocab models with 72″ sleepers. Blank (no lites).
-
72" Sleeper Panels72" Sleeper Panels
72″ SLEEPER PANELS
For 1995-2006 Kenworth T800 (Aerocab) and W900 (Aerocab) models, 1995+ T600 Aerocab models with no side fairings. For 72″ sleepers. Blank.
-
KenworthSleeper Panels
72″ SLEEPER PANELS WITH EXTENDERS
For 2007+ Kenworth T660 models with side mount exhaust. For 72″ sleepers with extender. Blank (no lites).
-
Peterbilt589
72″ SLEEPER PANELS WITH EXTENDERS
For Peterbilt 579 cab exhaust models with no chassis fairings. For 567 cab exhaust models as well as 589 models. Will NOT fit 2024+ models with new routed exhaust. Fit 72″ sleepers with extenders. Blank (no lites). Sold in pairs. Measure 3″ wide.
-
76" Sleeper Panels76" Sleeper Panels
76″ SLEEPER PANELS – DUAL CAB EXHAUST
For Kenworth T680, T880 and W990 models with dual cab exhaust and 76″ sleepers without extenders. Will NOT fit 2024+ models with new routed exhaust. Will fit T680 Next Gen models with cab mounted exhaust & fuel fill access behind the sleeper. Trucks with fuel fill cutouts in OEM panels must contact customer service at info@panelite.com. Blank (no lites). Measure 2.5″ …
-
76" Sleeper Panels76" Sleeper Panels
76″ SLEEPER PANELS – UNDERBODY EXHAUST
For Kenworth T680, T880 and W990 models with underbody exhaust and 76″ sleepers without extenders. Will not fit MLU/T680 Next Gen models. Blank (no lites). Measure 2.5″ wide.
-
76" Sleeper Panels76" Sleeper Panels
76″ SLEEPER PANELS WITH EXTENDERS
For Kenworth T680 and T880 underbody exhaust models with 76″ sleepers and extender. To be used in conjunction with transition panels. Will not fit MLU/T680 Next Gen models. Blank (no lites). Measure 2.5″ wide.
-
76" Sleeper Panels76" Sleeper Panels
76″ SLEEPER PANELS WITH EXTENDERS – DUAL CAB EXHAUST
For Kenworth T680, T880 and W990 models with dual cab exhaust and 76″ sleepers with extenders. Will NOT fit 2024+ models with new routed exhaust. Will fit T680 Next Gen models with cab mounted exhaust & fuel fill access behind the sleeper. Trucks with fuel fill cutouts in OEM panels must contact customer service at info@panelite.com. Blank (no lites). Measure 2.5″ …
-
Peterbilt388/389 Short Hood (123" BBC)
78″ BLANK SLEEPER PANELS
For Peterbilt 379, 388 and 389* models with 70″ (78″ new) sleepers. Sold in pairs. Blank (no lites). Measure 4″ wide. *Will not fit 2018+ 389 long hood (131″ BBC) models due to exhaust interference on the passenger side.
-
36770"/78" Sleepers
78″ SLEEPER PANELS
For Peterbilt 367 models with 70″ (78″ new) sleepers. To be used with extenders or end caps. Blank (no lites). Sold in pairs. Measures 4″ wide.
-
2007-20082009-2013
78″ SLEEPER PANELS
For 1997+ Peterbilt 367, 359, 377, 379, 388 and 389* models with 70″ (78″ new) sleepers. For 386 models without fairings. Measures 3″ wide. Blank (no lites). Sold in pairs. *Will not fit 2018+ 389 long hood (131″ BBC) models due to exhaust interference on the passenger side.
-
2007-20082009-2013
78″ SLEEPER PANELS – PAINTABLE
For Peterbilt 367, 379, 388 and 389* models with 70″ (78″ new) sleepers. Sold in pairs. Blank (no lites). Measure 4″ wide. Paintable. *Will not fit 2018+ 389 long hood (131″ BBC) models due to exhaust interference on the passenger side.
-
Peterbilt589
80″ SLEEPER PANELS WITH EXTENDERS
For Peterbilt 589 and 579 cab exhaust models with no chassis fairings. Also fit 567 cab exhaust models. Will NOT fit 2024+ models with new routed exhaust. For 80″ sleepers with extenders. Blank (no lites). Sold in pairs. Measure 3″ wide.
-
86" Sleeper Panels86" Sleeper Panels
86″ SLEEPER PANELS
For EPA 2007+ Kenworth T800 Aerocab and W900 Aerocab models with 86″ sleepers. Blank (no lites).
-
2014+ - 3" & 4" wide379
BLANK 4″ WIDE EXTENSION PANELS
For Peterbilt 379, 388 and 389 models. Measure 4″ wide. For 36″, 48″ and 63″ sleepers (44″, 58″ and 72″ new sleeper sizes). Blank (no lites). Sold in pairs.
-
2014+ - 3" & 4" wide379
BLANK 4″ WIDE EXTENSION PANELS
For Peterbilt 379, 388 and 389 models. Measure 4″ wide. For 70″ sleepers (78″ new sleeper sizes). Blank (no lites). Sold in pairs.
-
2014+ - 3" & 4" wide379
BLANK 4″ WIDE PAINTABLE EXTENSION PANELS
For Peterbilt 379, 388 and 389 models. Measure 4″ wide. For 48″ and 63″ sleepers (58″ and 72″ new sleeper sizes). Paintable. Blank (no lites). Sold in pairs.
-
2014+ - 3" & 4" wide379
BLANK 4″ WIDE PAINTABLE EXTENSION PANELS
For Peterbilt 379, 388 and 389 models. Measure 4″ wide. For 70″ sleepers (78″ new sleeper sizes). Paintable. Blank (no lites). Sold in pairs.
-
2007-20082009-2013
BLANK 4″ WIDE SLEEPER PANELS
For 389*, 388, 379, 367 and 365 models with 72″ sleepers (63″ old sleeper size). Plain (no lites). *Will not fit 2018+ 389 long hood (131″ BBC) models due to exhaust interference on the passenger side.
-
2011-2017388/389 Short Hood (123" BBC)
BLANK CAB PANELS
For 2011-2017 Peterbilt 388 models. Sold in pairs. Measure 3″ wide. The driver side 38.45″ long, passenger side 33.45″ long. Blank (no lites).
-
2009-2010388/389 Short Hood (123" BBC)
BLANK CAB PANELS
For 2009-2010 Peterbilt 388 models. Sold in pairs. Measure 3″ wide and 38.45″ long. Blank (no lites).
-
388/389 Short Hood (123" BBC)Cab Panels
BLANK EXTENDED DAYCAB CAB PANELS
For 2009-2017 Peterbilt 388 extended DayCab models. Sold in pairs. Measure 3″ wide and 57.43″ long. With wrap. Blank (no lites).
-
2007-2008 - 3" wide2014+ - 3" & 4" wide
BLANK EXTENSION PANELS
For 1997+ Peterbilt 379, 2007+ 388 models and 2007-2008 Peterbilt 389 models. For 70″ (78″ new) Unibilt sleepers. Sold in pairs. Blank (no lites). Measure 3″ wide. Hardware included.
-
2007-2008 - 3" wide2014+ - 3" & 4" wide
BLANK EXTENSION PANELS
For 1987+ Peterbilt 379 models, 2007+ Peterbilt 388 models as well as 2007-2008 Peterbilt 389 models. Measure 3″ wide. For 36″, 48″ and 63″ sleepers (44″, 58″ and 72″ new sleeper sizes). Blank (no lites). Sold in pairs.
-
Cab PanelsCab Panels
BLANK W900B CAB PANELS FOR STEP DPF MODELS
For 2011+ Kenworth W900B models with step DPF. Blank (no lites). Fits Aerocab and extended DayCab. Block heater cutout. Step lite cutouts. Measure 50.71″ long.
-
Cab PanelsCab Panels
BLANK W900B CAB PANELS WITH BLOCK HEATER CUTOUT
For 2011+ Kenworth W900B models with step DPF. Fits Aerocab and extended DayCab. Blank (no lites). Block heater cutout. Measure 50.71″ long.
-
1995-2006Cab Panels
BLANK W900L CAB PANELS
For 1995-2006 Kenworth W900L Aerocab models. Will also fit extended DayCabs. Blank (no lites). Measure 50.64″ long.
-
2011+Cab Panels
BLANK W900L CAB PANELS FOR STEP DPF MODELS
For 2011+ Kenworth W900L models with step DPF. Blank (no lites). Step lite cutouts. Will not fit DayCab models due to high-route exhaust.
-
2011+Cab Panels
BLANK W900L CAB PANELS FOR STEP DPF MODELS
For 2011+ Kenworth W900L models with step DPF. For extended DayCabs and Aerocabs. Blank (no lites). Step lite cutouts. Block heater cutout. Measure 51.67″ long.
-
2011+Cab Panels
BLANK W900L CAB PANELS FOR STEP DPF MODELS
For 2011+ Kenworth W900L models with step DPF. Will not fit DayCabs due to high-route exhaust. Blank (no lites). Block heater cutouts. Step lite cutouts. Measure 51.67″ long.
-
2011+Cab Panels
BLANK W900L CAB PANELS FOR STEP DPF MODELS
For 2011+ Kenworth W900L models with step DPF. Fits Aerocab and extended DayCab. Blank (no lites). Block heater cutout. Measure 51.67″ long.
-
52" SLEEPERS WITHOUT EXTENDERSKenworth
CAB EXHAUST 52″ SLEEPER PANELS – 5″ WIDE
For Kenworth W990 cab exhaust models with 52″ sleepers without extenders. Will NOT fit 2024+ models with new routed exhaust. Blank. Measure 5″ wide. Sold in pairs.
-
52" SLEEPERS WITHOUT EXTENDERSKenworth
CAB EXHAUST 52″ SLEEPER PANELS – 5″ WIDE PAINTABLE
For Kenworth W990 cab exhaust models with 52″ sleepers without extenders. Will NOT fit 2024+ models with new routed exhaust. Blank. Measure 5″ wide. Sold in pairs. Paintable.
-
76" SLEEPERS WITHOUT EXTENDERSKenworth
CAB EXHAUST 76″ SLEEPER PANELS – 5″ WIDE
For Kenworth W990 cab exhaust models with 76″ sleepers without extenders. Will NOT fit 2024+ models with new routed exhaust. Blank. Measure 5″ wide. Sold in pairs.
-
76" SLEEPERS WITHOUT EXTENDERSKenworth
CAB EXHAUST 76″ SLEEPER PANELS – 5″ WIDE PAINTABLE
For Kenworth W990 cab exhaust models with 76″ sleepers without extenders. Will NOT fit 2024+ models with new routed exhaust. Blank. Measure 5″ wide. Sold in pairs. Paintable.
-
Cab PanelsCAT
CAB PANELS
For 2012+ CT660 122 BBC single exhaust models. Driver side heater cutout. Blank (no lites).
-
Cab PanelsCAT
CAB PANELS
For 2012+ CT660 116 BBC single exhaust models. Driver side heater cutout. Blank (no lites).
-
Cab PanelsCAT
CAB PANELS
For 2012+ CT660 116 BBC dual exhaust models. Driver side heater cutout. Blank (no lites).
-
2013+Cab Panels
CAB PANELS
For 2013+ Kenworth T660 models. Blank (no lites). For use without sleeper panels. Block heater cutout.
-
2013+Cab Panels
CAB PANELS
For 2013+ Kenworth T660 models. Blank (no lites). For use without sleeper panels. Step lite cutouts. Block heater cutout.
-
2010-20122013+
CAB PANELS
For 2010+ Kenworth T660 models. Not to be used with sleeper panels. Blank.
-
2010-2012Cab Panels
CAB PANELS
For 2010-2012 Kenworth T660 models. Not to be used with sleeper panels. Blank. Block heater cutout.
-
Peterbilt389/389 Long Hood (131" BBC)
CAB PANELS – 2018+ 389 LONG HOOD (131″ BBC) – USE WITH OEM COWL
For 2018+ Peterbilt 389 Long Hood (131″ BBC) models. Must be used with the OEM cowl/hood extension panels. Sold in pairs. Blank. Driver side measures 4″ wide and 42.85″ long. Passenger side measures 1.25″ wide and 42.88″ long.
-
Cab PanelsCab Panels
CAB PANELS – DUAL CAB EXHAUST
For Kenworth T680, T880 and W990 models with dual cab exhaust. Will not fit 2024+ DayCab models. Will not fit the MLU/T680 Next Gen model. Blank (no lites). Block heater cutout.
-
Cab PanelsCab Panels
CAB PANELS – DUAL CAB EXHAUST
For Kenworth T680, T880 and W990 models with dual cab exhaust. Will not fit 2024+ DayCab models. Will not fit the MLU/T680 Next Gen model. Blank (no lites). Block heater cutouts.
-
Cab PanelsCAB PANELS
CAB PANELS – DUAL CAB EXHAUST
For Kenworth T680, T880 and W990 models with dual cab exhaust. Will not fit 2024+ DayCab models. Will not fit the MLU/T680 Next Gen model. Blank (no lites).
-
Cab PanelsHX Series
CAB PANELS – HX520 WITH DUAL EXHAUST
For pre-2022 International HX520 models with dual cab exhaust. Will not fit 2022+ models. Sold in pairs. Plain (no lites). Measure 4″ wide. Block heater cutout.
-
Cab PanelsMack
CAB PANELS – MACK CHU WITH SIDE MOUNT EXHAUST
For Mack CH models with side mount exhaust. Plain. Block heater cutout. OEM version.
-
KenworthT680
CAB PANELS – UNDERBODY EXHAUST
For Kenworth T680, T880 and W990 models. Will not fit the MLU/T680 Next Gen model. Will not fit 2024+ DayCab models. For use on underbody exhaust models with sleepers. Blank (no lites). Block heater cutout.
-
Cab PanelsISX Engine
CAB PANELS FOR STEP DPF MODELS WITH ISX ENGINE
For 2012+ Kenworth T800 split fender models with step DPF with ISX engines. Blank (no lites). Block heater cutout.
-
2018+388/389 Short Hood (123" BBC)
CAB PANELS FOR USE WITH OEM HOOD EXTENSION PANEL
For 2018+ Peterbilt 389 Short Hood (123″ BBC) models. Must be used with the OEM cowl. Sold in pairs. Blank.
-
Cab PanelsCascadia
CASCADIA DAYCAB CAB PANELS
For 2018+ Cascadia daycab models. Sold in pairs. Blank. Block heater cutout.
-
-
Peterbilt389/389 Long Hood (131" BBC)
ELITE CAB PANELS – 2018+ 389 LONG HOOD
For 2018+ Peterbilt 389 long hood (131″ BBC) models. Blank. Block heater cutout. Not to be used with OEM hood extension panels. Use with 10682000.
-
Peterbilt389/389 Long Hood (131" BBC)
ELITE CAB PANELS – 2018+ 389 LONG HOOD
For 2018+ Peterbilt 389 long hood (131″ BBC) models. Blank. Not to be used with OEM hood extension panels. Use with 10682000.
-
2018+388/389 Short Hood (123" BBC)
ELITE CAB PANELS – 389 SHORT HOOD 2018+
For 2018+ Peterbilt 389 short hood (123″ BBC) models. Blank (no lites). Not to be used with OEM hood extension panels. Use with 10682001.
-
2018+388/389 Short Hood (123" BBC)
ELITE CAB PANELS – 389 SHORT HOOD 2018+
For 2018+ Peterbilt 389 short hood (123″ BBC) models. Blank (no lites). Block heater cutout. Not to be used with OEM hood extension panels. Use with 10682001.
-
2013+Cab Panels
ENHANCED BOTTOM CAB PANELS
For 2013+ Kenworth T660 models. Enhanced bottom, to be used with sleeper panels. Blank. Block heater cutout.
-
2013+Cab Panels
ENHANCED BOTTOM CAB PANELS
For 2013+ Kenworth T660 models. Enhanced bottom, to be used with sleeper panels. Blank. Block heater cutout. Step lite cutouts.
-
2010-2012Cab Panels
ENHANCED BOTTOM CAB PANELS
For 2010-2012 Kenworth T660 models. Enhanced bottom, to be used with sleeper panels. Blank. Block heater cutout.
-
Peterbilt389/389 Long Hood (131" BBC)
EXTENDED 1.75″ WIDE CAB PANELS
For 2014-2017 Peterbilt 389 Long Hood (131″ BBC) models. Extended. For use with wide hood extension panels. Sold in pairs. Measures 1.75″ wide and 54.05″ long. Blank (no lites).
-
Peterbilt389/389 Long Hood (131" BBC)
EXTENDED CAB PANELS
For 2014-2017 Peterbilt 389 Long Hood (131″ BBC) models. Sold in pairs. Driver side panel 3″ wide, passenger side 1.75″ wide. Extended. Both panels are 54.05″ long. Blank (no lites).
-
CAB PANELSKenworth
EXTENDED CAB PANELS – DUAL EXHAUST
For Kenworth W990 cab exhaust models. Will not fit 2024+ DayCab models. Extended panels. Driver 4.78″ wide, passenger 2.75″ wide. Blank. Designed to be used in conjunction with 5″ sleeper panels.
-
CAB PANELSKenworth
EXTENDED CAB PANELS – DUAL EXHAUST
For Kenworth W990 cab exhaust models. Will not fit 2024+ DayCab models. Extended panels. Driver 4.78″ wide, passenger 2.75″ wide. Blank. Block heater cutouts. Designed to be used in conjunction with 5″ sleeper panels.
-
KenworthSleeper Extension Panels
EXTENSION PANELS
For 1992+ Kenworth T600, T800 and W900 models. Sold in pairs. Hardware is included. Blank (no lites).
-
KenworthT680
HIGH-ROOF MODEL TRANSITION PANELS
For Kenworth high-roof T680 models, with 52″ or 76″ sleeper. Will not fit the MLU/T680 Next Gen model. Sold in pairs. Blank (no lites).
-
AnthemMack
MACK ANTHEM – 48″ SLEEPER PANELS
For Mack Anthem models with 48″ sleepers. Will fit models with or without chassis fairings. OEM replacements. Blank. Sold in pairs.
-
MackAnthem
MACK ANTHEM SLEEPER EXTENDER PANEL
For Mack Anthem models with 70″ sleepers. Fits models with or without chassis fairings. Blank. Sold in pairs.
-
KenworthT680
MID-ROOF MODEL TRANSITION PANELS
For Kenworth mid-roof T680 models with 52″ or 76″ sleepers. Will also fit W990 models with underbody exhaust. Will not fit the MLU/T680 Next Gen model. Sold in pairs. Blank (no lites).
-
KenworthMidRoof/HighRoof
MID-ROOF/HIGH-ROOF SUNVISOR – 8.5″ DEEP
For Kenworth T680 and T880 mid-roof and high-roof sleeper models. Will fit the MLU/T680 Next Gen model – except those with A-pillar turning vanes. For trucks without an existing sunvisor. Measures 8.5″ deep.
-
CAB PANELSKenworth
PAINTABLE EXTENDED CAB PANELS – DUAL EXHAUST
For Kenworth W990 cab exhaust models. Will not fit 2024+ DayCab models. Extended panels. Driver 4.78″ wide, passenger 2.75″ wide. Blank. Paintable. Designed to be used in conjunction with 5″ sleeper panels.
-
CAB PANELSKenworth
PAINTABLE EXTENDED CAB PANELS – DUAL EXHAUST
For Kenworth W990 cab exhaust models. Will not fit 2024+ DayCab models. Extended panels. Driver 4.78″ wide, passenger 2.75″ wide. Blank. Paintable. Block heater. Designed to be used in conjunction with 5″ sleeper panels.
-
CAB PANELSKenworth
PAINTABLE EXTENDED CAB PANELS – DUAL EXHAUST
For Kenworth W990 cab exhaust models. Will not fit 2024+ DayCab models. Extended panels. Driver 4.78″ wide, passenger 2.75″ wide. Blank. Paintable. Block heater cutouts. Designed to be used in conjunction with 5″ sleeper panels.
-
44" without extenders589
PETERBILT 589 SLEEPER PANELS – 44″ SLEEPER – BLANK
For Peterbilt 589 models with 44″ sleepers. Blank. Measure 3″ wide.
-
58" without extenders589
PETERBILT 589 SLEEPER PANELS – 58″ SLEEPER – BLANK
For Peterbilt 589 models with 58″ sleepers. Blank. Measure 3″ wide.
-
58980" without extenders
PETERBILT 589 SLEEPER PANELS – 80″ SLEEPER – BLANK
For Peterbilt 589 models with 80″ sleepers. Blank. Measure 3″ wide.
-
MackSkirting Kits
SKIRTING KIT – MACK CH
For Mack CH models. Cab, 70″ sleepers, extenders. Measure 2.5″ wide. Blank.
-
MackAnthem
SLEEPER EXTENDER – MACK ANTHEM
For Mack Anthem models with 48″ sleepers. Blank. Sold in pairs.
-
HX SeriesHX520
SLEEPER PANELS – HX520 & HX620
For pre-2022 International HX520 and HX620 models with 51″ sleepers with extenders. Will not fit 2022+ models. Blank (no lites). Sold in pairs.
-
Cab PanelsKenworth
T800 SPLIT FENDER CAB PANELS FOR MX ENGINE MODELS
For 2011+ Kenworth T800 split fender models, with step DPF and Paccar MX engines. Blank (no lites). Block heater cutout. Measures 43.5″ long.
-
HIGHROOFKenworth
TRANSITION PANELS – T680 NEXT GEN HIGHROOF
For 2022+ Kenworth T680 Next Gen high roof models. Blank. Sold in pairs.
-
KenworthMIDROOF
TRANSITION PANELS – T680 NEXT GEN MID-ROOF
For 2022+ Kenworth T680 Next Gen mid-roof models. Blank (no lights). Sold in pairs.
Blank
Showing all 127 results
275 Industrial Road
Cambridge, Ontario N3H 4R7
Phone: 1-800-331-7952
© 2025 High Bar Brands All Rights Reserved